No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display tunnel

display tunnel

Function

The display tunnel command displays information about tunnels.

Format

display tunnel { tunnel-id | all | statistics }

Parameters

Parameter Description Value
tunnel-id Specifies a tunnel ID. The value is a string of 1 to 20 characters without spaces. When double quotation marks are used around the string, spaces are allowed in the string.
all Displays information about all tunnels. -
statistics Collects the statistics about tunnels by type. -

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display tunnel tunnel-id command displays detailed information about a specific tunnel.

The display tunnel all command displays information about the tunnels that are already set up, including the tunnel IDs, tunnel types, and destination IP addresses.

The display tunnel statistics command displays the statistics about different types of tunnels that are already set up.

Example

# Display information about a tunnel.

<HUAWEI> display tunnel 0x0000000001004c4b4c
Tunnel ID:       0x0000000001004c4b4c                                                                                               
Type:            ldp                                                       
Name:            LDP LSP                                         
Destination:     10.3.3.3                                         
Instance ID:     0         
Mtu:             1       
Cost:            1                                      
Status:          UP          
Table 12-11  Description of the display tunnel command output

Item

Description

Tunnel ID

Indicates the tunnel ID. Tunnel IDs identify tunnels with the same instance ID and same tunnel type.

Type

Indicates the tunnel types.

Name

Indicates the name of the tunnel.

Destination

Indicates the destination IP address of the tunnel.

Instance ID

Indicates the ID of the VPN instance (0 indicates that the tunnel is a public network tunnel).

Mtu

Indicates the tunnel MTU.

Cost

Indicates the tunnel cost.

Status

Indicates the tunnel status:

  • UP: The tunnel is established.

  • Down: The tunnel is not established.

# Display information about all tunnels.

<HUAWEI> display tunnel all
Tunnel ID                     Type                Destination         Status                                                        
-----------------------------------------------------------------------------                                                       
0x0000000001004c4b4c          ldp                 10.3.3.3             UP                                                            
0x0000000001004c4b4d          ldp                 10.3.3.9             UP  

# Display the statistics about different types of tunnels.

<HUAWEI> display tunnel statistics
TunnelType                               Number                                                                                     
-----------------------------------------------------------                                                                         
ldp                                      2                  
Table 12-12  Description of the display tunnel statistics command output
Item Description

TunnelType

Indicates the tunnel types.

Number

Indicates the number of tunnels.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 42755

Downloads: 328

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next