No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ospfv3 request-list

display ospfv3 request-list

Function

The display ospfv3 request-list command displays the statistics of the request list of OSPFv3.

Format

display ospfv3 [ process-id ] request-list [ [ area area-id | interface interface-type interface-number | peer router-id ]* | statistics ]

Parameters

Parameter Description Value
process-id Specifies the process ID of OSPFv3. The value is an integer ranging from 1 to 4294967295.
area area-id Specifies the OSPFv3 area ID. The integer ranges from 0 to 4294967295. The value of the area ID can be a decimal integer or in the IPv4 address format.
interface interface-type interface-number Specifies the type and number of the interface. -
peer router-id Indicates the Router ID of a neighbor. It is in dotted decimal notation.
statistics Displays the statistics of the request list of OSPFv3. -

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display of the command is used to diagnose faults.

Example

# Display the statistics of the request list in OSPFv3.

<HUAWEI> display ospfv3 request-list
    OSPFv3 Process (1)                                                  
    Interface  Vlanif10        Area-ID   0.0.0.1
    Nbr-ID   10.254.255.255                                              
    LS-Type               LS-ID           AdvRouter       SeqNum       Age  
    Link-LSA              0.0.2.2         10.254.255.255  0x80000001   151 
    Router-LSA            0.0.0.0         10.254.255.255  0x80000005   46 
    Intra-Area-Prefix-LSA 0.0.0.1         10.254.255.255  0x80000001   45 
    AS-External-LSA       0.0.0.1         10.254.255.255  0x80000001   113 
    AS-External-LSA       0.0.0.2         10.254.255.255  0x80000001   113
Table 9-83  Description of the display ospfv3 request-list command output

Item

Description

OSPFv3 Process

ID of the OSPFv3 process

Interface

Interface that connects with the neighbor

Area-ID

ID of the area that the interface belongs to

Nbr-ID

Router ID of the neighbor

LS-Type

LSA type

LS-ID

Link State ID ( from LSA header)

AdvRouter

Advertising router (from LSA header)

SeqNum

Sequence number (from LSA header)

Age

Aging time (from LSA header)

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 42653

Downloads: 326

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next