No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ospfv3 topology

display ospfv3 topology


The display ospfv3 topology command displays the OSPFv3 area topology.


display ospfv3 [ process-id ] topology [ area area-id ] [ statistics | verbose ]


Parameter Description Value
process-id Identifies the OSPFv3 process ID. The value is an integer ranging from 1 to 4294967295.
area area-id Specifies the area ID. The value of the area ID can be a decimal integer or in the IPv4 address format. The integer ranges from 0 to 4294967295.
statistics Displays the statistics of the OSPFv3 topology. -
verbose Displays the detailed information of the topology. -


All views

Default Level

1: Monitoring level

Usage Guidelines



# Display the topology of OSPFv3 area 1.

<HUAWEI> display ospfv3 topology area 1
 OSPFv3 Process (1)
 Bits :
 B - ABR    E - ASBR    V - VIRTUAL    NT - NSSA translator
 OSPFv3 Area ( topology
 Type  ID (If-Index)       Bits      Metric    Next-Hop        Interface
 Rtr                      --
 Rtr                      1        Vlanif10
 Net (268435842)          1         Vlanif10
Table 9-91  Description of the display ospfv3 topology command output



OSPFv3 Process

ID of the OSPFv3 process


SPF type:
  • Rtr: Router

  • Net: Network

ID (If-Index)

Router ID ( If-Index ) is the interface ID of the DR in the network type.


B bit and E bit indicates switch type
  • B bit: ABR
  • E bit: ASBR


Metric of path to the node


Next hop of the path to the node


Egress of the path to the node

Related Topics
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 87904

Downloads: 400

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next