No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset ospfv3 frr

reset ospfv3 frr


The reset ospfv3 frr command starts OSPFv3 IP FRR calculation again.


reset ospfv3 { process-id | all } frr


Parameter Description Value
process-id Specifies the ID of an OSPFv3 process. If this parameter is not specified, FRR calculation is performed in all OSPFv3 processes. The value is an integer that ranges from 1 to 4294967295.
all Reset frr for all OSPFv3 processes running on router. -


User view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

This command is a maintenance command. It can be used to forcibly perform FRR recalculation without deleting the FRR configuration.


FRR has been configured in an OSPFv3 process.


OSPFv3 IP FRR calculation does not affect the normal running of OSPFv3.


# Perform FRR calculation again in OSPFv3 process 1.

<HUAWEI> reset ospfv3 1 frr
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 70250

Downloads: 374

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next