No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ospfv3 asbr-summary

display ospfv3 asbr-summary


The display ospfv3 asbr-summary command displays OSPFv3 route summarization.


display ospfv3 [ process-id ] asbr-summary [ ipv6-address prefix-length ] [ verbose ]


Parameter Description Value
process-id Specifies the ID of an OSPFv3 process. The value is an integer ranging from 1 to 4294967295.
ipv6-address Specifies a matching IPv6 address. The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.
prefix-length Specifies the length of a route prefix. The value is an integer ranging from 1 to 128.
verbose Displays detailed information about OSPFv3 route summarization. -


All views

Default Level

1: Monitoring level

Usage Guidelines

If neither ipv6-address nor prefix-length is specified, this command displays all detailed information about OSPFv3 route summarization.


# Display OSPFv3 route summarization.

<HUAWEI> display ospfv3 asbr-summary verbose
      OSPFv3 Process (1)
 Total summary address count :1

          Summary Address

 Prefix        : 10::
 Prefix length : 32
 Tag           : 0 (Not Configured)
 Status        : Advertised
 Cost          : 10 (Configured)
 Delay         : (Not Configured)
 Type          : 2 (Larger than any link state path)
 The Count of Route is: 3

Destination       Mask        Protocol      Proc       Type     Metric
    10::0          64          Static        0           2        1   
    10::2          128         Static        0           2        1   
    10::3          128         Static        0           2        1
Table 9-70  Description of the display ospfv3 asbr-summary command output



Total Summary address count

Number of summarized routes configured by using the asbr-summary command

Summary Address

Detailed information about summarized routes


Prefix of a summarized route

Prefix length

Prefix length of a summarized route


Tag of a summarized route


Whether a summarized route is advertised:

  • Advertised: indicates that a summarized route is advertised.
  • NotAdvertised: indicates that a summarized route is not advertised.


Cost of a summarized route


Delay time to start aggregating routes


Type of AS-External routes

  • 1: Type-1
  • 2: Type-2

The Count of Route is

Number of summarized routes


Destination address of a summarized route


Mask of a summarized route


Protocol carried by a summarized route


Process ID carried by a summarized route


Metric of a summarized route

Related Topics
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 69231

Downloads: 374

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next