No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display tunnel-policy

display tunnel-policy

Function

The display tunnel-policy command displays the configurations of tunnel policies.

NOTE:

Only CE6870EI supports this command.

Format

display tunnel-policy [ tunnel-policy-name ]

Parameters

Parameter Description Value
tunnel-policy-name Specifies the name of tunnel policy. If policy-name is specified, information about the specified tunnel policy is displayed. The value is the name of an existing tunnel policy.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Using the display tunnel-policy command, you can check the configured tunnel policy and information about a tunnel policy before applying it.

Example

# Display information about all the tunnel policies.

<HUAWEI> display tunnel-policy
Total   tunnel policy num:              1
Sel-Seq tunnel policy num:              1
Binding tunnel policy num:              0
Invalid tunnel policy num:              0

Tunnel Policy Name                      Select-Seq                        Load balance No  Unmix
--------------------------------------------------------------------------------------------------
gre1                                    GRE                               1                Disable
                                                                                              
Table 12-14  Description of the display tunnel-policy command output

Item

Description

Total tunnel policy num

Total number of tunnel policies.

Sel-Seq tunnel policy num

Total number of tunnel policies in select-sequence mode.

Binding tunnel policy num

Total number of tunnel policies in tunnel binding mode.

Invalid tunnel policy num

Total number of invalid tunnel policies.

Tunnel Policy Name

Name of tunnel policies.

Select-Seq

Priorities of tunnel types in descending order.

Load balance No

Number of tunnels for load balancing. The default value is 1.

Unmix

Indicates that only one type of tunnel can be selected or not.

  • Enable: Indicates that only one type of tunnel can be selected.

  • Disable: Indicates that not only one type of tunnel can be selected.

# Display information about the tunnel policy.

<HUAWEI> display tunnel-policy gre1
Tunnel Policy Name                      Select-Seq                        Load balance No  Unmix
--------------------------------------------------------------------------------------------------
gre1                                    GRE                               1                Disable   
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 50193

Downloads: 337

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next