No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ospfv3 area

display ospfv3 area

Function

The display ospfv3 area command displays OSPFv3 area information.

Format

display ospfv3 [ process-id ] area [ area-id ]

Parameters

Parameter Description Value
process-id Specifies the ID for an OSPFv3 process. The value is an integer ranging from 1 to 4294967295.
area-id Specifies the area ID for the area to be displayed. If the value is a decimal integer, it ranges from 0 to 4294967295. If the value is an IPv4 address, it specifies the matched IP address in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display OSPFv3 area information.

<HUAWEI> display ospfv3 area
OSPFv3 Process (1)
 Area 0.0.0.0(BACKBONE)  InActive
       Number of interfaces in this area is 0
       SPF algorithm executed 0 times
       Number of LSA 0. Checksum Sum 0x0
       Number of Unknown LSA 0
       Area Bdr Router count: 0
       Area ASBdr Router count: 0
       Router ID conflict state: Normal
       Next SPF Trigger Time 0 millisecs
 Area 0.0.0.1 InActive
       Number of interfaces in this area is 1
       SPF algorithm executed 3 times
       Number of LSA 4. Checksum Sum 0x23AC8
       Number of Unknown LSA 0
       Area Bdr Router count: 0
       Area ASBdr Router count: 1
       Router ID conflict state: Normal
       Next SPF Trigger Time 0 millisecs
Table 9-69  Description of the display ospfv3 area command output

Item

Description

Number of interfaces in this area

Indicates the number of active interfaces.

SPF algorithm executed

Indicates the number of SPF calculations.

Number of LSA

Indicates the number of LSAs in this area.

Checksum

Indicates the area checksum.

Number of Unknown LSA

Indicates the number of unknown LSAs in the area.

Area Bdr Router count

Indicates the number of ABRs in the area.

Area ASBdr Router count

Indicates the number of ASBRs in the area.

Router ID conflict state

Indicates the Router ID conflict state.

Next SPF Trigger Time

Delay in SPT calculation after the topology changes.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 50228

Downloads: 337

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next