No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The rr-filter command creates a reflection policy for the route reflectors.

The undo rr-filter command removes the configuration.

By default, no reflection policy for a route reflector is created.


Only CE8860EI, CE8850EI, CE7855EI, CE7850EI, CE6880EI, CE6870EI, CE6860EI, CE6856HI, CE6855HI, CE6851HI, CE6850HI and CE6850U-HI support this command.


rr-filter { extcomm-filter-number | extcomm-filter-name }

undo rr-filter


Parameter Description Value
extcomm-filter-number Specifies the number of the extended community filter supported by the route-reflector group. You can specify only one extended community filter each time. It is an integer that ranges from 1 to 399.
extcomm-filter-name Specifies the name of the extended community filter supported by the route-reflector group. You can specify only one extended community filter each time. The extcomm-filter-name must already exist.


BGP-VPNv4 address family view

Default Level

2: Configuration level

Usage Guidelines

Full-mesh connections need to be established between IBGP peers in an AS to ensure the connectivity between the IBGP peers. When there are many IBGP peers, it is costly to establish a fully-meshed network. An RR or a confederation can be used to solve the problem. Only the IBGP route of which route-target extended community attribute meets the matching rules can be reflected. This allows load balancing among RRs.


# Create a route-reflector group, and enable the automatic filtering for VPNv4 route updates on the outbound interface. The group should be created on the basis of the permitted route target extended community attributes.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] ipv4-family vpnv4
[*HUAWEI-bgp-af-vpnv4] rr-filter 10
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 88468

Downloads: 405

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next