No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent trap enable feature-name l3vpn

snmp-agent trap enable feature-name l3vpn

Function

The snmp-agent trap enable feature-name l3vpn command enables the trap function for the L3VPN module.

The undo snmp-agent trap enable feature-name l3vpn command disables the trap function for the L3VPN module.

By default, the trap function for the L3VPN module is disabled.

NOTE:

CE6880EI does not support this command.

Format

snmp-agent trap enable feature-name l3vpn [ trap-name trap-name ]

undo snmp-agent trap enable feature-name l3vpn [ trap-name trap-name ]

Parameters

Parameter Description Value
trap-name trap-name Enables the traps of L3VPN events of specified types. The traps are as follows:
  • hwipv4routeexceed
  • hwipv4routeexceedclear
  • hwipv4routethresholdexceed
  • hwipv4routethresholdexceedclear
  • hwipv6routeexceed
  • hwipv6routeexceedclear
  • hwipv6routethresholdexceed
  • hwipv6routethresholdexceedclear
  • hwl3vpnvrfroutemidthreshcleared
  • hwl3vpnvrfv6down
  • hwl3vpnvrfv6up
  • mplsl3vpnnumvrfroutemaxthreshcleared
  • mplsl3vpnvrfdown
  • mplsl3vpnvrfnumvrfroutemaxthreshexceeded
  • mplsl3vpnvrfroutemidthreshexceeded
  • mplsl3vpnvrfup

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The Simple Network Management Protocol (SNMP) is a standard network management protocol widely used on TCP/IP networks. It uses a central computer (a network management station) that runs network management software to manage network elements. The management agent on the network element automatically reports traps to the network management station. After that, the network administrator immediately takes measures to resolve the problem.

The snmp-agent trap enable feature-name l3vpn command enables the trap function for L3VPN modules.

Precautions

To enable the trap function of one or more types of trap messages, specify trap-name.

Example

# Enable the trap of VRF Down event in the system view.

<HUAWEI> system-view
[~HUAWEI] snmp-agent trap enable feature-name l3vpn trap-name mplsl3vpnvrfdown

# Disable the trap of VRF Down event in the system view.

<HUAWEI> system-view
[~HUAWEI] undo snmp-agent trap enable feature-name l3vpn trap-name mplsl3vpnvrfdown
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 50271

Downloads: 337

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next