No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Command Line Configurations

Displaying Command Line Configurations

After the configurations are complete, you can run the display command to check the configuration and running information on the device.

For example, after all configurations of the FTP service are complete, you can run the display ftp server command to check parameters of the FTP server. For details on the usage and functions of the display command, see Checking the Configuration in each feature of the Configuration Guide.

You can also check the current running configurations and configurations in the current view.
  • Check the current running configurations:

    display current-configuration

    This command does not display parameters that use default settings.

  • Check configurations in the current view:

    display this

    This command does not display parameters that use default settings.

  • You can run the timestamp enable command to enable the timestamp function in the system so that the system adds the query time to the output of the display command.

  • If the value of a field in the command output is too long, only some beginning characters of the value are displayed.

Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 88300

Downloads: 405

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next