No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfv3 mib-binding

ospfv3 mib-binding


The ospfv3 mib-binding command binds an OSPFv3 process to SNMP and makes OSPFv3 respond to SNMP requests.

The undo ospfv3 mib-binding command disables the binding.

By default, there is no binding between the OSPFv3 process and SNMP.


ospfv3 mib-binding process-id

undo ospfv3 mib-binding


Parameter Description Value
process-id Specifies the OSPFv3 process ID. The value ranges from 1 to 4294967295.


System view

Default Level

2: Configuration level

Usage Guidelines

When multiple OSPFv3 processes are enabled, you can bind OSPFv3 MIB to a process so that this process can be processed.

Before running this command, run the ospfv3 command in the system view to create an OSPFv3 process.


# Bind OSPFv3 process to SNMP.

<HUAWEI> system-view
[~HUAWEI] ospfv3 1
[*HUAWEI-ospfv3-1] quit
[*HUAWEI] ospfv3 mib-binding 100

# Disable the binding.

<HUAWEI> system-view
[~HUAWEI] undo ospfv3 mib-binding
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 73678

Downloads: 380

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next