No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfv3 area

ospfv3 area

Function

The ospfv3 area command enables the OSPFv3 process on an interface and specifies the area the process belongs to.

The undo ospfv3 area command disables the OSPFv3 process on the interface.

By default, the OSPFv3 protocol is not enabled on the interface.

Format

ospfv3 process-id area area-id [ instance instance-id ]

undo ospfv3 process-id area area-id [ instance instance-id ]

Parameters

Parameter Description Value
process-id Specifies an OSPFv3 process ID. The value is an integer ranging from 1 to 4294967295.
area area-id Specifies an OSPFv3 area ID. The value of the area ID can be a decimal integer or in the IPv4 address format. The integer ranges from 0 to 4294967295.
instance instance-id Specifies the instance ID of an interface. The value is an integer ranging from 0 to 255. The default value is 0.

Views

Interface view

Default Level

2: Configuration level

Usage Guidelines

Before running this command on an interface, run the ipv6 enable command to enable IPv6 in the interface view.

Example

# Enable OSPFv3 in VLANIF 10, and enable OSPFv3 in area 1.

<HUAWEI> system-view
[~HUAWEI] ospfv3
[*HUAWEI-ospfv3-1] router-id 10.1.1.1
[*HUAWEI-ospfv3-1] quit
[*HUAWEI] interface vlanif 10
[*HUAWEI-Vlanif10] ipv6 enable
[*HUAWEI-Vlanif10] ospfv3 1 area 1

# Enable OSPFv3 in 10GE1/0/1, and enable OSPFv3 in area 1.

<HUAWEI> system-view
[~HUAWEI] ospfv3
[*HUAWEI-ospfv3-1] router-id 10.1.1.1
[*HUAWEI-ospfv3-1] quit
[*HUAWEI] interface 10ge 1/0/1
[*HUAWEI-10GE1/0/1] undo portswitch
[*HUAWEI-10GE1/0/1] ipv6 enable
[*HUAWEI-10GE1/0/1] ospfv3 1 area 1
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 51048

Downloads: 337

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next