No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfv3 peer router-id

ospfv3 peer router-id

Function

The ospfv3 peer router-id command sets the DR priority and IPv6 addresses for adjacent switches on an NBMA network.

The undo ospfv3 peer router-id command removes the setting.

By default, the IPv6 addresses for the adjacent switches on an NBMA network is not set.

Format

ospfv3 peer router-id router-id ipv6-address [ dr-eligible | cost cost | poll interval | instance instance-id ]*

undo ospfv3 peer router-id router-id [ ipv6-address ] [ dr-eligible | cost [ cost ] | poll [ interval ] | instance instance-id ]*

Parameters

Parameter Description Value
router-id Specifies the Router ID of the adjacent node. The value is in dotted decimal notation.
ipv6-address Specifies the Link-local address of the adjacent node. The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.
dr-eligible Specifies the neighbor can take part in the DR election. -
cost cost Specifies the cost of the interface on the neighbor switch of the NBMA network. The value is an integer ranging from 1 to 65535.
poll interval Specifies the interval for sending the polling Hello packet on the neighbor switch of the NBMA network. The value is an integer ranging from 1 to 65535.
instance instance-id Specifies the instance ID of the interface. The value is an integer ranging from 0 to 255. The default value is 0.

Views

Interface view

Default Level

2: Configuration level

Usage Guidelines

None

Example

# On Vlanif10, specify the peer end to take part in DR selection.

<HUAWEI> system-view
[~HUAWEI] ospfv3
[*HUAWEI-ospfv3-1] router-id 10.1.1.1
[*HUAWEI-ospfv3-1] quit
[*HUAWEI] interface vlanif 10
[*HUAWEI-Vlanif10] ipv6 enable
[*HUAWEI-Vlanif10] ospfv3 1 area 1
[*HUAWEI-Vlanif10] ospfv3 peer router-id 10.1.1.1 FE80::1 dr-eligible

# On 10GE1/0/1, specify the peer end to take part in DR selection.

<HUAWEI> system-view
[~HUAWEI] ospfv3
[*HUAWEI-ospfv3-1] router-id 10.1.1.1
[*HUAWEI-ospfv3-1] quit
[*HUAWEI] interface 10ge 1/0/1
[*HUAWEI-10GE1/0/1] undo portswitch
[*HUAWEI-10GE1/0/1] ipv6 enable
[*HUAWEI-10GE1/0/1] ospfv3 1 area 1
[*HUAWEI-10GE1/0/1] ospfv3 peer router-id 10.1.1.1 FE80::1 dr-eligible
Related Topics
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 50226

Downloads: 337

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next