No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
tunnel-policy (system view)

tunnel-policy (system view)

Function

The tunnel-policy command creates a tunnel policy and displays the tunnel policy view.

The undo tunnel-policy command deletes the specified tunnel policy.

By default, no tunnel policy is created in the system.

NOTE:

Only CE8860EI, CE8850EI, CE7855EI, CE7850EI, CE6880EI, CE6870EI, CE6860EI, CE6856HI, CE6855HI, CE6851HI, CE6850HI and CE6850U-HI support this command.

Format

tunnel-policy policy-name

undo tunnel-policy policy-name

Parameters

Parameter Description Value
policy-name Displays the name of a tunnel policy. The value is a string of 1 to 39 case-sensitive characters except spaces. When double quotation marks are used to include the string, spaces are allowed in the string.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, a VPN instance selects LSPs without performing load balancing based on the default tunnel policy. If you want to make a change, run the tunnel-policy command to create a tunnel policy.

Precautions

If you change the tunnel policy in a VPN instance, VPN services may be interrupted due to a possibility of iteration failures.

When LDP LSPs functioning as public network tunnels balance traffic, LDP LSPs are automatically iterated to load-balancing LDP LSPs if the number of load-balancing tunnels in a configured tunnel policy does not take effect.

Example

# Create a tunnel policy named policy1 and enter the tunnel policy view.

<HUAWEI> system-view
[~HUAWEI] tunnel-policy policy1
[*HUAWEI-tunnel-policy-policy1]
Related Topics
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 50439

Downloads: 337

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next