No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ZTP Commands

ZTP Commands

display system ztp

Function

The display system ztp command displays whether the system completes deployment through ZTP or whether the system starts the ZTP process at the next startup without configuration.

Format

display system ztp

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

None

Example

# Check whether the system completes deployment through ZTP.

<HUAWEI> display system ztp
---------------------------------------------------------
Slot  Last startup ZTP status   Next startup ZTP status
---------------------------------------------------------
1     disable                   enable
---------------------------------------------------------
Table 3-5  Description of the display system ztp command output

Item

Description

Slot

Slot ID.

Last startup ZTP status

Whether the system completes deployment through ZTP at the last startup without configuration:
  • enable: yes

  • disable: no

Next startup ZTP status

Whether the system starts the ZTP process at the next startup without configuration:
  • enable: yes

  • disable: no

set ztp { enable | disable }

Function

The set ztp enable command enables the ZTP function on the device.

The set ztp disable command disables the ZTP function on the device.

By default, the ZTP function is enabled on devices.

Format

set ztp enable

set ztp disable

Parameters

None

Views

User view

Default Level

3: Management level

Usage Guidelines

By default, the ZTP function is enabled so that an unconfigured device can start the ZTP process during a startup. To disable an unconfigured device from starting the ZTP process during a startup, disable the ZTP function on the device.

Example

# Disable the ZTP function.

<HUAWEI> set ztp disable
Related Topics
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 51268

Downloads: 337

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next