No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
description (OSPFv3 Area)

description (OSPFv3 Area)

Function

The description command configures a description for an OSPFv3 area.

The undo description command deletes the configured description of an OSPFv3 area.

By default, no description is configured for an OSPFv3 area.

Format

description text

undo description

Parameters

Parameter Description Value
text Specifies a description for an OSPFv3 area. The value is a string of 1 to 80 case-sensitive space-tolerant characters.

Views

OSPFv3 area view

Default Level

2: Configuration level

Usage Guidelines

By configuring a description for an OSPFv3 area, you can identify different OSPFv3 areas easily.

Example

# Describe the OSPFv3 area 0.

<HUAWEI> system-view
[~HUAWEI] ospfv3 1
[*HUAWEI-ospfv3-1] area 0
[*HUAWEI-ospfv3-1-area-0.0.0.0] description main area
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 68832

Downloads: 374

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next