No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
description (tunnel-policy view)

description (tunnel-policy view)


The description command configures the description of the current tunnel policy.

The undo description command cancels the setting.

By default, a tunnel policy does not have a description.


Only CE8860EI, CE8850EI, CE7855EI, CE7850EI, CE6880EI, CE6870EI, CE6860EI, CE6856HI, CE6855HI, CE6851HI, CE6850HI and CE6850U-HI support this command.


description description-information

undo description


Parameter Description Value
description-information Specifies the description of the tunnel policy. The value is a string of 1 to 80 case-sensitive characters with spaces.


Tunnel policy view

Default Level

2: Configuration level

Usage Guidelines

After using the tunnel-policy (system view) command to create a tunnel policy, you can run the description command to configure a description of the tunnel policy to facilitate later query.


# Configure the description of the tunnel policy named test1.

<HUAWEI> system-view
[~HUAWEI] tunnel-policy test1
[*HUAWEI-tunnel-policy-test1] description two lsps are used
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 89423

Downloads: 405

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next