No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent trap feature-name l3vpn all

display snmp-agent trap feature-name l3vpn all

Function

The display snmp-agent trap feature-name l3vpn all command displays whether the trap function is enabled for the L3VPN module and the excessive trap flag.

NOTE:

CE6880EI does not support this command.

Format

display snmp-agent trap feature-name l3vpn all

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

The display snmp-agent trap feature-name l3vpn all command displays the following information:
  • Trap names supported by the L3VPN module. The trap names are the same as the trap names specified by the snmp-agent trap enable feature-name l3vpn command. Each trap name corresponds to a network element abnormality.
  • Trap status of the L3VPN module. You can check whether the trap is reported based on the trap name.

Example

# Display whether the trap function is enabled for the L3VPN module and the excessive trap flag.

<HUAWEI> display snmp-agent trap feature-name l3vpn all
------------------------------------------------------------------------------  
Feature name: L3VPN                                                             
Trap number : 16                                                                
------------------------------------------------------------------------------  
Trap name                      Default switch status   Current switch status    
hwIpv4RouteExceed              off                     off                      
hwIpv4RouteExceedClear         off                     off                      
hwIpv4RouteThresholdExceed     off                     off                      
hwIpv4RouteThresholdExceedClear                                                 
                               off                     off                      
hwIpv6RouteExceed              off                     off                      
hwIpv6RouteExceedClear         off                     off                      
hwIpv6RouteThresholdExceed     off                     off                      
hwIpv6RouteThresholdExceedClear                                                 
                               off                     off                      
hwL3vpnVrfRouteMidThreshCleared                                                 
                               off                     off                      
hwL3vpnVrfV6Down               off                     off                      
hwL3vpnVrfV6Up                 off                     off                      
mplsL3VpnNumVrfRouteMaxThreshCleared                                            
                               off                     off                      
mplsL3VpnVrfDown               off                     off                      
mplsL3VpnVrfNumVrfRouteMaxThreshExceeded                                        
                               off                     off                      
mplsL3VpnVrfRouteMidThreshExceeded                                              
                               off                     off                      
mplsL3VpnVrfUp                 off                     off 
Table 12-10  Description of the display snmp-agent trap feature-name l3vpn all command output

Item

Description

Feature name

Name of the module.

Trap number

Number of trap messages.

Trap name

Types of trap messages.

Default switch status

Default status of a trap message:

  • on: indicates that the trap function is enabled by default.
  • off: indicates that the trap function is disabled by default.

Current switch status

Status of a trap message:

  • on: indicates that the trap function is enabled.
  • off: indicates that the trap function is disabled.
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 52525

Downloads: 339

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next