No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display default-parameter l3vpn

display default-parameter l3vpn

Function

The display default-parameter l3vpn command displays the default configuration of L3VPN during initialization.

NOTE:

CE6880EI does not support this command.

Format

display default-parameter l3vpn

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Scenario

You can run this command to check the default configuration of L3VPN during initialization, for example, default label allocation mode in a VPN instance.

Precautions

This command displays only the default configuration of L3VPN during initialization. The command output shows the default configuration of L3VPN during initialization even when the default configuration is changed.

Example

# Display the default configuration of L3VPN during initialization.

<HUAWEI> display default-parameter l3vpn
 Apply label mode          :                                                                                                        
     IPv4-family           : label per instance                                                                                     
     IPv6-family           : label per instance    
Table 12-4  Description of the display default-parameter l3vpn command output

Item

Description

Apply label mode

Default label allocation mode.

IPv4-family

IPv4 address family.

IPv6-family

IPv6 address family.

label per instance

The default label allocation mode is label per instance.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 69238

Downloads: 374

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next