No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lsa-age refresh disable (OSPFv3)

lsa-age refresh disable (OSPFv3)

Function

The lsa-age refresh disable command disables OSPFv3 LSA aging management.

The undo lsa-age refresh disable command enables OSPFv3 LSA aging management.

By default, OSPFv3 LSA aging management is enabled.

Format

lsa-age refresh disable

undo lsa-age refresh disable

Parameters

None

Views

OSPFv3 view

Default Level

2: Configuration level

Usage Guidelines

If an exception occurs in the age field of LSAs, LSAs may be aged unexpectedly, causing LSA flapping or a route calculation error. For example, if the abnormal aging time is 2500s and the actual aging time is 500s, LSAs are aged prematurely. To address this problem, OSPFv3 LSA aging management is enabled by default. If the aging time in a received LSA is greater than 1800s, OSPFv3 considers the LSA abnormal and changes the aging time to 1700s until the aging time values of all LSAs in the area become the same. In this case, routes can be calculated correctly.

Example

# Disable OSPFv3 LSA aging management.

<HUAWEI> system-view
[~HUAWEI] ospfv3 100
[*HUAWEI-ospfv3-100] lsa-age refresh disable
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 42815

Downloads: 328

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next