No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Traffic Isolation Between the Service and Management planes Configuration Commands

Traffic Isolation Between the Service and Management planes Configuration Commands

management-plane isolate disable

Function

The management-plane isolate disable command disables traffic isolation between the service plane and management port.

The undo management-plane isolate disable command enables traffic isolation between the service plane and management port.

By default, traffic isolation between the service plane and management port is enabled.

Format

management-plane isolate disable

undo management-plane isolate disable

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To improve the security of the management network, the system separates the traffic of the service plane and management port by default. That is, unauthorized users cannot access the device through service interfaces and attackers cannot attack the management network through the service network.

Precautions

The interval between the management-plane isolate disable and undo management-plane isolate disable commands must be longer than 30 seconds.

Configuring a VPN instance on a management network interface and disabling traffic isolation on the management network interface from the service plane cannot be performed on the same CE6810LI switch.

Example

# Disable traffic isolation between the service plane and management port.
<HUAWEI> system-view
[~HUAWEI] management-plane isolate disable
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 52361

Downloads: 339

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next