No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
route-distinguisher

route-distinguisher

Function

The route-distinguisher command configures a route distinguisher (RD) for a VPN instance address family.

The undo route-distinguisher command deletes the RD configuration in a specified VPN instance address family.

By default, no RD is configured for the VPN instance address family.

Format

route-distinguisher route-distinguisher

undo route-distinguisher route-distinguisher

Parameters

Parameter Description Value
route-distinguisher Specifies the value of an RD. The forms of RD are as follows:
  • 2-byte AS number: 4-byte user-defined number, for example, 101:3. An AS number ranges from 0 to 65535. A user-defined number ranges from 0 to 4294967295. The AS number and the user-defined number cannot be 0s at the same time. That is, an RD cannot be 0:0.

  • Integral 4-byte AS number: 2-byte user-defined number, for example, 65537:3. An AS number ranges from 65536 to 4294967295. A user-defined number ranges from 0 to 65535. The AS number and user-defined number cannot be both 0s. That is, an RD cannot be 0:0.

  • 4-byte AS number in dotted notation: 2-byte user-defined number, for example, 0.0:3 or 0.1:0. A 4-byte AS number in dotted notation is in the format of x.y, where x and y are integers that range from 0 to 65535 and from 0 to 65535, respectively. A user-defined number ranges from 0 to 65535. The AS number and user-defined number cannot be both 0s. That is, an RD cannot be 0.0:0.

  • IPv4-address: 2-byte user-defined number, for example, 192.168.122.15:1. An IP address ranges from 0.0.0.0 to 255.255.255.255. A user-defined number ranges from 0 to 65535.

-

Views

VPN instance view, VPN instance IPv4 address family view, VPN instance IPv6 address family view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you create a VPN instance and enable the address family, run this command to configure an RD for the VPN instance address family.

Different VPN instances may have the same route prefix. To allow a PE to determine to which VPN instance a route belongs, run the route-distinguisher command to configure an RD for an address family of a VPN instance on the PE. After the configuration, the PE will add an RD to the route received from the VPN instance, and then the route prefix becomes a globally unique VPN IPv4 or IPv6 route.

Precautions

Execution of this command will also enable the IPv4 address family.

When the CE is dual-homed, the RDs on the PEs must be globally unique to ensure routing.

RDs cannot be modified but can be deleted after being configured. After an RD is deleted, all configurations in the VPN instance IPv4 address family or the IPv6 address family of the corresponding VPN instance will be deleted.

Example

# Configure an RD for the VPN instance named vpn1.

<HUAWEI> system-view
[~HUAWEI] ip vpn-instance vpn1
[*HUAWEI-vpn-instance-vpn1] ipv4-family
[*HUAWEI-vpn-instance-vpn1-af-ipv4] route-distinguisher 22:1
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 42708

Downloads: 326

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next