No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Using Tab

Example for Using Tab

Networking Requirements

The user wants to enter commands in fast and convenient mode to facilitate completion of service configurations. The device supports the function that the user enters the first character or first several characters of the keyword and presses Tab to complete the keyword, which improves input efficiency.

Configuration Roadmap

The configuration roadmap is as follows:

  1. If there is only one match for the incomplete keyword, enter the incomplete keyword and press Tab.

  2. If there are several matches for the keyword, enter the incomplete keyword and press Tab repeatedly until the desired keyword is displayed.

  3. Enter the incorrect keyword and press Tab. In this case, the incorrect keyword remains unchanged.

Use Tab if:

There Is Only One Match for an Incomplete Keyword

  1. Enter an incomplete keyword.

    [*HUAWEI] info-
  2. Press Tab.

    The system replaces the entered keyword and displays it in a new line with the complete keyword followed by a space.
    [*HUAWEI] info-center

There Are Several Matches for an Incomplete Keyword

# The keyword info-center can be followed by the following keywords. (The command output provided here is used for reference only. The actual output information may differ from the following information.)

[*HUAWEI] info-center ?
  channel             Set the name of information channel
  console             Setting of console configuration 
  enable              Enable the information center
  filter-id           Specify the configuration of the ID filtering table
  log-severity        Set log severity
  logbuffer           Setting of log buffer configuration
  logfile             Setting of logfile configuration
  loghost             Setting of logging host configuration
  max-logfile-number  Setting of logfile numbers
  monitor             Setting of monitor configuration
  snmp                Setting of snmp configuration
  source              Information source setting
  statistic-suppress  Suppression that the first occurrence of an event is
                      always logged immediately, but subsequence identical
                      messages are suppressed
  timestamp           Set the time stamp type of information
  trapbuffer          Setting of trap buffer configuration
  1. Enter an incomplete keyword.

    [*HUAWEI] info-center log
  2. Press Tab.

    The system displays the prefixes of all the matched keywords. In this example, the prefix is log.
    [*HUAWEI] info-center log-severity
    Press Tab to switch from one matched keyword to another. In this case, the cursor closely follows the end of a word.
    [*HUAWEI] info-center logbuffer
    [*HUAWEI] info-center logfile
    [*HUAWEI] info-center loghost

    Stop pressing Tab when the desired keyword is displayed.

An Incorrect keyword Is Entered

  1. Enter an incorrect keyword.

    [*HUAWEI] info-center loglog
  2. Press Tab.

    [*HUAWEI] info-center loglog

    The system displays information in a new line, but the keyword loglog remains unchanged and there is no space between the cursor and the keyword, indicating that this keyword does not exist.

Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 87381

Downloads: 400

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next