No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ospfv3 routing

display ospfv3 routing

Function

The display ospfv3 routing command displays the OSPFv3 routing table.

Format

display ospfv3 [ process-id ] routing [ [ ipv6-address prefix-length ] | ase-routes | inter-routes | intra-routes | nssa-routes ] [ verbose ] [ age { min-value min-age-value | max-value max-age-value } * ]

display ospfv3 [ process-id ] routing { abr-routes | asbr-routes } [ verbose ]

display ospfv3 [ process-id ] routing statistics

Parameters

Parameter Description Value
process-id Identifies the OSPFv3 process ID. The value is an integer ranging from 1 to 4294967295.
ipv6-address Indicates the IPv6 address. The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.
prefix-length Specifies the length of the prefix. The value is an integer ranging from 0 to 128.
abr-routes Displays the routing table of ABR in OSPFv3. -
asbr-routes Displays routing table of ASBR in OSPFv3. -
intra-routes Displays the statistics of OSPFv3 routes in an area. -
inter-routes Displays the statistics of OSPFv3 routes between areas. -
ase-routes Displays the statistics of OSPFv3 routes outside an AS. -
nssa-routes Displays the statistics of OSPFv3 routes in an NSSA. -
statistics Displays the statistics of all routing tables. -
verbose Displays the detailed information about the OSPFv3 routing table. -
age Displays routing table information based on an aging time. -
min-value min-age-value Displays OSPFv3 routing table information with the aging time greater than or equal to min-age-value. The value is an integer ranging from 0 to 4294967295.
max-value max-age-value Displays OSPFv3 routing table information with the aging time less than or equal to max-age-value. The value is an integer ranging from 0 to 4294967295.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

By using this command with different parameters, you can view the routes of a specified interface or next hop.

The command output can help you troubleshoot OSPFv3 faults.

Example

# Display the OSPFv3 routing table.

<HUAWEI> display ospfv3 routing
                                                                                
Codes : E2 - Type 2 External, E1 - Type 1 External, IA - Inter-Area,
        N - NSSA
Flags : A - Added to URT6
                                                                                
OSPFv3 Process (1)                                                              
     Destination                                                         Metric 
       Next-hop                                                                 
IA   FC00:0:0:12::/64                                                         3 
       via FE80::225:9EFF:FE95:7C2B, Vlanif23, Flags : A                        
     FC00:0:0:23::/64                                                         1 
       directly connected, Vlanif23, Flags : A                                  
     FC00:0:0:113::/64                                                        1 
       directly connected, Vlanif1122, Flags : A                                
IA   FC00:0:0:172::/64                                                        2 
       via FE80::225:9EFF:FE95:7C2B, Vlanif23, Flags : A                        
Table 9-85  Description of the display ospfv3 routing command output

Item

Description

Codes

Route type:

  • E2: Type 2 external route
  • E1: Type 1 external route
  • IA: Inter-area route
  • N: NSSA route

Flags

Route flags

A: Indicates that the route is added to the IPv6 unicast routing table.

OSPFv3 Process

OSPFv3 process

Destination

Destination address

Metric

Metric to the destination

Next-hop

Next hop to the destination

Related Topics
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 52463

Downloads: 339

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next