No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM_1.3.6.1.4.1.2011.5.25.149.4.0.23 routeExceed

PIM_1.3.6.1.4.1.2011.5.25.149.4.0.23 routeExceed

Description

The number of existed routing entries exceeded the global upper limit.(LimitType=[LimitType], AddressFamily=[AddressFamily], CurrentCount=[CurrentCount], LimitCount=[LimitCount],SrcAddr=[SrcAddr], GrpAddr=[GrpAddr], InstanceName=[InstanceName])

The number of created PIM entries on the device reached the specified limit.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

routeExceed

Trap OID

1.3.6.1.4.1.2011.5.25.149.4.0.23

Alarm ID

0x00f100ec

Alarm Type

environmentalAlarm

Raise or Clear

Raise

Match trap

PIM_1.3.6.1.4.1.2011.5.25.149.4.0.24 routeExceedClear

Parameters

Parameter Description

LimitType

Type of entry for which an entry number limit takes effect, which is one of the followings:
  • PIM-SM (*, G) entry
  • PIM-SM (S, G) entry
  • PIM-DM (*, G) entry
  • PIM-DM (S, G) entry
  • BIDIR-PIM (*, G) entry

AddressFamily

Address family

CurrentCount

Number of created PIM entries on the device

LimitCount

Limit on the number of PIM entries on the device

SrcAddr

Multicast source address

GrpAddr

Multicast group address

InstanceName

Instance of which the number of created PIM entries on the device reaches the specified limit

VB Parameters

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.149.4.1.74

hwPimNotificationLimitType

N/A

1.3.6.1.4.1.2011.5.25.149.4.1.62

hwPimNotificationAddressType

N/A

1.3.6.1.4.1.2011.5.25.149.4.1.72

hwPimNotificationTypeTotalCount

N/A

1.3.6.1.4.1.2011.5.25.149.4.1.73

hwPimNotificationTypeLimit

N/A

1.3.6.1.4.1.2011.5.25.149.4.1.69

hwPimNotificationSrcAddr

N/A

1.3.6.1.4.1.2011.5.25.149.4.1.70

hwPimNotificationGrpAddr

N/A

1.3.6.1.4.1.2011.5.25.149.4.1.60

hwPimInstanceName

N/A

Impact on the System

The number of PIM entries reaches the specified limit. No new entries can be created.

Possible Causes

New entries were added, or the limit on the number of PIM entries on the device was changed to a smaller value.

Procedure

  1. Run the display multicast global statistics command to check whether the number limit is low.

    • If the limit is low, go to Step 2.

    • If the limit is not low, go to Step 3.

  2. Run the multicast global limit command to set a proper limit. Then, check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 4.

    • If the alarm persists, go to Step 3.

  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.
Translation
Download
Updated: 2019-03-20

Document ID: EDOC1000166558

Views: 203859

Downloads: 115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next