No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FEI_1.3.6.1.4.1.2011.5.25.42.2.1.7.6 hwPortSecRcvInsecurePktAlarm

FEI_1.3.6.1.4.1.2011.5.25.42.2.1.7.6 hwPortSecRcvInsecurePktAlarm

Description

Interface([IfIndexA]) receives packets with non-secure source mac-address. (IfName=[IfName], IfIndex=[IfIndexB], Action=[Action](1:restrict;2:protect;3:error-down))

The interface receives a packet of which the MAC address is not included in secure MAC addresses.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwPortSecRcvInsecurePktAlarm

Trap OID

1.3.6.1.4.1.2011.5.25.42.2.1.7.6

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

IfName

Indicates the interface name.

IfIndex

Indicates the interface index.

Action

Indicates the action configured on the interface.

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.2.2.1.2

ifDescr

ifIndex

1.3.6.1.4.1.2011.5.25.42.2.1.11.1.3

hwPortSecurityProtectAction

hwPortSecurityPort

Impact on the System

None

Possible Causes

The interface receives a packet of which the MAC address is not included in secure MAC addresses.

Procedure

  • In the interface view, run the port-security protect-action { protect | restrict | error-down } command to configure the protection action.
Translation
Download
Updated: 2019-03-20

Document ID: EDOC1000166558

Views: 196240

Downloads: 115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next