No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NQA_1.3.6.1.4.1.2011.5.25.111.6.10 nqaJitterStatsTestFailed

NQA_1.3.6.1.4.1.2011.5.25.111.6.10 nqaJitterStatsTestFailed

Description

The NQA entry test failed. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], OperStatus=[OperStatus], Index=[Index], RttSum=[RttSum], RttSum2Low=[RttSum2Low], RttSum2High=[RttSum2High], RttMin=[RttMin], RttMax=[RttMax], PacketOutOfSequences=[PacketOutOfSequences], Errors=[Errors], Busies=[Busies], Timeouts=[Timeouts], Drops=[Drops], ProbeResponses=[ProbeResponses], SentProbes=[SentProbes], MaxDelaySD=[MaxDelaySD], MaxDelayDS=[MaxDelayDS], JitterOut=[JitterOut], JitterIn=[JitterIn], OWSumSD=[OWSumSD], OWSumDS=[OWSumDS])

Indicates that the number of testing failures in a test instance reached the set threshold. The value of the default threshold was 1. The test-failtimes command could modify the threshold.

Attributes

Attribute Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

nqaJitterStatsTestFailed

Trap OID

1.3.6.1.4.1.2011.5.25.111.6.10

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

OwnerIndex

Indicates the administrator of an NQA test.

TestName

Indicates the name of an NQA test instance.

TargetAddressType

Indicates the destination address type of an NQA test instance.

TargetAddress

Indicates the destination address of an NQA test instance.

OperStatus

Indicates the status of an NQA test instance.

Index Indicates the index of the result table.
RttSum Indicates the RTT sum of an NQA test instance.
RttSum2Low Indicates the sum of RTT squared right 32 bits.
RttSum2High Indicates the sum of RTT squared left 32 bits.
RttMin Indicates the minimum RTT value of an NQA test instance.
RttMax Indicates the maximum RTT value of an NQA test instance.
PacketOutOfSequences Indicates the number of out-of-order packets.
Errors Indicates the number of packets with incorrect sequence numbers.
Busies Indicates the number of initialization or resource application failures.
Timeouts Indicates the number of times that no response is received within the timeout period.
Drops Indicates the number of packets failed to be sent.
ProbeResponses Indicates the number of received packets.
SentProbes Indicates the number of sent packets.
MaxDelaySD Indicates the maximum OWD from the source to the destination.
MaxDelayDS Indicates the maximum OWD from the destination to the source.
JitterOut Indicates the jitter in sending packets.
JitterIn Indicates the jitter in receiving packets.
OWSumSD Indicates the sum of OWD from the source to the destination.
OWSumDS Indicates the sum of OWD from the destination to the source.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.111.2.2.1.1

nqaAdminParaTargetAddressType

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

1.3.6.1.4.1.2011.5.25.111.2.2.1.2

nqaAdminParaTargetAddress

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

1.3.6.1.4.1.2011.5.25.111.2.3.1.9

nqaScheduleOperStatus

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

1.3.6.1.4.1.2011.5.25.111.4.3.1.5

nqaJitterStatsRTTSum

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.6

nqaJitterStatsRTTSum2Low

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.7

nqaJitterStatsRTTSum2High

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.8

nqaJitterStatsRTTMin

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.9

nqaJitterStatsRTTMax

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.36

nqaJitterStatsPacketOutOfSequences

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.37

nqaJitterStatsErrors

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.38

nqaJitterStatsBusies

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.39

nqaJitterStatsTimeouts

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.42

nqaJitterStatsDrops

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.40

nqaJitterStatsProbeResponses

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.41

nqaJitterStatsSentProbes

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.44

nqaJitterStatsMaxDelaySD

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.45

nqaJitterStatsMaxDelayDS

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.51

nqaJitterStatsJitterOut

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.52

nqaJitterStatsJitterIn

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.56

nqaJitterStatsOWSumSD

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

1.3.6.1.4.1.2011.5.25.111.4.3.1.57

nqaJitterStatsOWSumDS

nqaAdminCtrlOwnerIndex

nqaAdminCtrlTestName

nqaJitterStatsIndex

Impact on the System

None.

Possible Causes

This trap occurs in the NQA test.

1.

The destination address was inexistent and unreachable. The number of continuous test failures in a test reached the set threshold.

2.

The destination address existed, but the route was unreachable. The number of continuous test failures in a test reached the set threshold.

3.

The destination port was not correctly configured, which led to the connection failure.

Procedure

  1. Run the display this command in the NQA test view to check whether the destination address is correctly configured. If not, run the destination-address command in the NQA test view to modify the destination address.

    Perform the test again to check whether the alarm is cleared.

    • If so, go to Step 8.
    • If not, go to Step 2.

  2. Run the ping command in the NQA test view to check whether the route is reachable.

    • If the destination address is correctly configured, but the route is not reachable, run the display ip routing-table command to check and routing table and rectify the routing fault. If the test fails again, go to Step 7.
    • If the route is reachable, go to Step 3.

  3. Run the display this command in the NQA test view to check whether the destination port is correctly configured. If not, run the destination-port command in the NQA test view to modify the related parameters.

    Perform the test again to check whether the alarm is cleared.

    • If so, go to Step 8.
    • If not, go to Step 4.

  4. Run the display this command in the system view to check the Jitter's version.

    • If the Jitter's version is 1, go to Step 7.
    • If the Jitter's version is 2, go to Step 5.

  5. Run the display nqa server command in the System view to check whether the server port is correctly configured.

    • If so, go to Step 7.
    • If not, go to Step 6.

  6. Run the nqa server udpecho in the system view to modify the server. Restart the test instance.

    Perform the test again to check whether the alarm is cleared.

    • If so, go to Step 8.
    • If not, go to Step 7.

  7. Contact technical support personnel.
  8. End.
Translation
Download
Updated: 2019-03-20

Document ID: EDOC1000166558

Views: 197338

Downloads: 115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next