No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L3VPN_1.3.6.1.4.1.2011.5.25.177.1.3.8 hwL3vpnVrfRouteMidThreshCleared

L3VPN_1.3.6.1.4.1.2011.5.25.177.1.3.8 hwL3vpnVrfRouteMidThreshCleared

Description

The number of prefixes in the VPN instance fell below the middle threshold. (VpnInstanceName=[VpnInstanceName], VpnInstanceRouteCount=[VpnInstanceRouteCount], MidThresholdValue=[MidThresholdValue])

The number of public network route prefixes fell below the middle threshold set by using the ip prefix-limit number alert-percent [ route-unchanged ] command.

The number of route prefixes in a VPN instance fell below the middle threshold set by using the prefix limit number alert-percent [ route-unchanged ] command.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

L3VPN_MIB_TRAP_MID_CLEARED

Trap OID

1.3.6.1.4.1.2011.5.25.177.1.3.8

Alarm ID

0x09110002

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

L3VPN_1.3.6.1.2.1.10.166.11.0.3 mplsL3VpnVrfRouteMidThreshExceeded

Parameters

Name Meaning

VpnInstanceName

Indicates the name of a VPN instance.

NOTE:

If a VPN instance name is "_public_", the alarm cause is that the number of public network route prefixes exceeds or is about to exceed the maximum limit.

VpnInstanceRouteCount

Indicates the number of existing routes or prefixes.

MidThresholdValue

Indicates that the alarm threshold of routes or prefixes.

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.10.166.11.1.3.1.1.3

mplsL3VpnVrfPerfCurrNumRoutes

N/A

1.3.6.1.2.1.10.166.11.1.2.2.1.9

mplsL3VpnVrfConfMidRteThresh

mplsL3VpnVrfName;

Impact on the System

After the number of route prefixes falls below the ip prefix-limit value, a device can normally receive routes.

After the number of route prefixes falls below the prefix limit value, a device can normally receive routes.

Possible Causes

The number of public network route prefixes fell below the threshold specified in the ip prefix-limit command.

The total number of VPN prefixes in the VPN routing table fell below the threshold specified in the prefix limit command.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-20

Document ID: EDOC1000166558

Views: 194594

Downloads: 113

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next