No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.2.1.14.16.2.7 ospfVirtIfAuthFailure

OSPF_1.3.6.1.2.1.14.16.2.7 ospfVirtIfAuthFailure

Description

A packet is received on a virtual interface from a router whose authentication key or authentication type conflicts with the local authentication key or authentication type. (VirtIfAreaId=[area-id], VirtIfNeighbor=[neighbor-router-id], ProcessId=[process-id], RouterId=[router-id], ConfigErrorType=[error-type], PacketType=[packet-type], InstanceName=[instance-name])

The virtual-link interface authentication failed. The possible cause was that the configuration of the virtual-link interface authentication was incorrect.

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

ospfVirtIfAuthFailure

Trap OID

1.3.6.1.2.1.14.16.2.7

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

VirtIfAreaId

Indicates the area ID.

VirtIfNeighbor

Indicates the router ID of the neighbor on the virtual link.

ProcessId

Indicates the process ID.

RouterId

Indicates the ID of the local switch.

ConfigErrorType

Indicates the error type.
  • 5: Auth type Mismatch
  • 6: Auth Failure

PacketType

Indicates the type of the packet.
  • 1: Hello packet
  • 2: DD packet
  • 3: Request packet
  • 4: Update packet
  • 5: Acknowledgement packet
  • 6: Update packet Retrans
  • 7: Update packet flood

InstanceName

Indicates the instance name.

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.14.1.1

ospfRouterId

N/A

1.3.6.1.2.1.14.9.1.1

ospfVirtIfAreaId

ospfVirtIfAreaId;

ospfVirtIfNeighbor;

1.3.6.1.2.1.14.9.1.2

ospfVirtIfNeighbor

ospfVirtIfAreaId;

ospfVirtIfNeighbor;

1.3.6.1.2.1.14.16.1.2

ospfConfigErrorType

N/A

1.3.6.1.2.1.14.16.1.3

ospfPacketType

N/A

Impact on the System

This trap message is generated after the virtual link interface receives a packet indicating authentication parameters are incorrectly configured.

Possible Causes

The configuration of authentication of the virtual link interface was incorrect.

Procedure

  1. Run the display current-configuration configuration ospf command to check whether the interface authentication configurations on the two ends of the virtual link are consistent.

    • If so, go to Step 3.

    • If not, go to Step 2.

  2. Perform the following operations according to the networking:

    • If it is allowed to modify the configurations on the two ends to be consistent, go to Step 3.

    • If it is not allowed to modify the configurations on the two interfaces to be consistent, go to Step 4.

  3. If the authentication is in plain text, modify the authentication password. If the authentication is in cipher text, run the following command to reconfigure the authentication on the two interfaces as required.

    • vlink-peer router-id [ dead dead-interval | hello hello-interval | retransmit retransmit-interval | smart-discover | trans-delay trans-delay-interval | [ simple [ plain plain-text | [ cipher ] cipher-text ] | { md5 | hmac-md5 | hmac-sha256 } [ key-id { plain plain-text | [ cipher ] cipher-text } ] | authentication-null | keychain keychain-name ] ] *

    Check whether the trap is cleared.

    • If so, go to Step 5.

    • If not, go to Step 4.

  4. Collect the trap information, log information, and configuration of the switch, and contact technical support personnel technical personnel.
  5. End.
Translation
Download
Updated: 2019-03-20

Document ID: EDOC1000166558

Views: 195415

Downloads: 115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next