No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RM_1.3.6.1.4.1.2011.5.25.145.19.2.4 hwPublicIpv6PrefixThresholdExceedClear

RM_1.3.6.1.4.1.2011.5.25.145.19.2.4 hwPublicIpv6PrefixThresholdExceedClear

Description

The number of public IPv6 prefixes falls below the threshold. (PrefixCount=[hwCurIpv6PrefixNum], Threshold=[hwIpv6PrefixLimitValue])

The number of IPv6 public route prefixes fell below the clear alarm threshold.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwPublicIpv6PrefixThresholdExceedClear

Trap OID

1.3.6.1.4.1.2011.5.25.145.19.2.4

Alarm ID

0x70122011

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

RM_1.3.6.1.4.1.2011.5.25.145.19.2.3 hwPublicIpv6PrefixThresholdExceed

Parameters

Parameter Description

PrefixCount

Indicates the number of IPv6 public route prefixes in the routing table.

Threshold

Indicates the threshold of the number of IPv6 public route prefixes.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.145.9.1

hwCurIpv6PrefixNum

N/A

1.3.6.1.4.1.2011.5.25.145.9.2

hwIpv6PrefixLimitValue

N/A

Impact on the System

Services will not be affected.

Possible Causes

Cause 1:

The network administrator deleted some routes from the routing table or the number of routes learned by dynamic protocols decreased due to network topology changes.

Cause 2:

The threshold of IPv6 public route prefixes was increased or the limit on the number of IPv4 public route prefixes was deleted.

Procedure

  1. This alarm message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-20

Document ID: EDOC1000166558

Views: 197536

Downloads: 115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next