No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSTP_1.3.6.1.4.1.2011.5.25.42.4.2.18 hwMstpProNewPortStateForwarding

MSTP_1.3.6.1.4.1.2011.5.25.42.4.2.18 hwMstpProNewPortStateForwarding

Description

The MSTP process's port has been set to forwarding state. (ProcessID=[ProcessID], InstanceID=[InstanceID], PortID1=[PortID1], PortID2=[PortID2], PortID3=[PortID3], PortID4=[PortID4], PortIDFlag=[PortIDFlag], PortState=[PortState], IfIndex=[IfIndex], PortName=[PortName], PwName=[PwName])

The port in the MSTP process entered the forwarding state.

Attribute

Attribute Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwMstpProNewPortStateForwarding

Trap OID

1.3.6.1.4.1.2011.5.25.42.4.2.18

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description
ProcessID Indicates the MSTP process ID.
InstanceID Indicates the instance ID.
PortID1 Indicates ID 1 of the port in the MSTP process.
PortID2 Indicates ID 2 of the port in the MSTP process.
PortID3 Indicates ID 3 of the port in the MSTP process.
PortID4 Indicates ID 4 of the port in the MSTP process.
PortIDFlag Indicates the port flag.
IfIndex Indicates the interface index.
PortState Indicates the port state.
PortName Indicates the port name.
PwName Indicate the pw name.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1

hwMstpProNewPortState

hwMstpProNewPortState

1.3.6.1.4.1.2011.5.25.42.4.1.33

hwMstpPwName

hwMstpPwName

1.3.6.1.2.1.31.1.1.1.1

ifName

ifName

Impact on the System

The network topology will change.

Possible Causes

The network topology changed.

Procedure

  • The network topology changed.
    1. View physical devices on the network to check whether a new physical link that has STP enabled is added.

      • If a new physical link that has STP enabled is added, go to Step 2.
      • If no new physical link that has STP enabled is added, go to Step 3.

    2. Check whether the added physical link is necessary.

      • If the added physical link is necessary, go to Step 3.
      • If the added physical link is unnecessary, go to Step 4.

    3. Run the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id ] [ brief ] command to check whether the interfaces are consistent with the STP calculation results.

      • If the interfaces are consistent with the STP calculation results, the alarm will be cleared.
      • If the interfaces are inconsistent with the STP calculation results, go to Step 5.

    4. Correctly deploy the network topology, and then check whether the alarm is cleared. If the alarm persists, go to Step 5.
    5. Collect trap, log, and configuration information, and contact technical support personnel.
Translation
Download
Updated: 2019-03-20

Document ID: EDOC1000166558

Views: 195015

Downloads: 113

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next