No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DEFEND_1.3.6.1.4.1.2011.5.25.165.2.2.7.4 hwCpcarAutoPortDefendAlarmResume

DEFEND_1.3.6.1.4.1.2011.5.25.165.2.2.7.4 hwCpcarAutoPortDefendAlarmResume

Description

Auto port defend detection recovered in slot [SlotId]. (Protocol=[Protocol], Interface=[IfName])

The auto port defense was cleared in the specified slot.

Attribute

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwCpcarAutoPortDefendAlarmResume

Trap OID

1.3.6.1.4.1.2011.5.25.165.2.2.7.4

Alarm ID

0x0963200a

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

DEFEND_1.3.6.1.4.1.2011.5.25.165.2.2.7.3 hwCpcarAutoPortDefendAlarm

Parameters

Parameter Description

SlotId

Indicates the slot ID.

Protocol

Indicates the protocol type.

IfName

Indicates the port name.

VB Parameters

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.165.2.1.7.7

hwCpcarAutoDefendSlotStr

N/A

1.3.6.1.4.1.2011.5.25.165.2.1.7.8

hwCpcarAutoDefendProtocol

N/A

1.3.6.1.4.1.2011.5.25.165.2.1.7.6

hwCpcarAutoDefendIfName

N/A

Impact on the System

If this alarm is reported, the auto port defense is cleared.

Possible Causes

The packet rate of one protocol received by a port falls below 75% of the default CAR value, and the packet rate of all protocols received by the top two ports falls below 85% of the default CAR value.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-20

Document ID: EDOC1000166558

Views: 203884

Downloads: 115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next