No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RESTful API Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the OPS APIs supported by the device, including OPS-supported operations, request examples, elements in the requests, response examples, elements in the responses, and response status codes.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VRRP Interface Configurations

VRRP Interface Configurations

Query VRRP Interface Configurations

Operation

URI

Description

GET

/vrrp/interfaces/interface

Query VRRP interface configurations, including the interface name and recovery delay.

  • Request example
    <?xml version="1.0" encoding="UTF-8"?> 
    <interface> 
        <ifName></ifName> 
        <ttlCheckFlag></ttlCheckFlag> 
        <sendModeAll></sendModeAll> 
        <sendSubVlanId></sendSubVlanId> 
        <recoverDelay></recoverDelay> 
    </interface>

    Table 3-655describes elements in requests.

    Table 3-655  Elements

    Element

    Description

    ifName

    Specifies an interface name.

    ttlCheckFlag

    Specifies whether a device is enabled to check the TTL value in received VRRP packets. If the TTL value is not 255, the packets are discarded. By default, a device is enabled to check the TTL value in received VRRP packets.

    sendModeAll

    Specifies that VRRP packets are sent to all sub-VLANs of a super VLAN.

    sendSubVlanId

    Specifies a sub-VLAN to which VRRP packets are sent. The default value is 0, indicating that VRRP packets are sent to an active sub-VLAN with the smallest ID. This element is configured for a super VLAN interface only.

    recoverDelay

    Specifies the recovery delay, in seconds. After a recovery delay is configured, a VRRP backup group responds to an interface Up event after the configured recovery delay. The default recovery delay is 0s. Configuring a recovery delay helps suppress interface status flapping.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?> 
    <interface> 
        <ifName>10GE1/0/1</ifName> 
        <ttlCheckFlag>true</ttlCheckFlag> 
        <sendSubVlanId>0</sendSubVlanId> 
        <sendModeAll>false</sendModeAll> 
        <recoverDelay>0</recoverDelay> 
    </interface>

    Table 3-656describes elements in responses.

    Table 3-656  Elements

    Element

    Description

    ifName

    Specifies an interface name.

    ttlCheckFlag

    Specifies whether a device is enabled to check the TTL value in received VRRP packets. If the TTL value is not 255, the packets are discarded. By default, a device is enabled to check the TTL value in received VRRP packets.

    sendModeAll

    Specifies that VRRP packets are sent to all sub-VLANs of a super VLAN.

    sendSubVlanId

    Specifies a sub-VLAN to which VRRP packets are sent. The default value is 0, indicating that VRRP packets are sent to an active sub-VLAN with the smallest ID. This element is configured for a super VLAN interface only.

    recoverDelay

    Specifies the recovery delay, in seconds. After a recovery delay is configured, a VRRP backup group responds to an interface Up event after the configured recovery delay. The default recovery delay is 0s. Configuring a recovery delay helps suppress interface status flapping.

    Table 3-657describes status codes in responses.

    Table 3-657  Status codes

    Status Code

    Description

    200 OK

    The operation succeeded.

    400 Bad Request

    The request operation failed because the request is incorrect in syntax or the information attribute in the request is incorrect.

    500 Internal Server Error

    The request operation failed because of internal errors in services or unidentified processing errors.

Modify VRRP Interface Configurations

Operation

URI

Description

PUT

/vrrp/interfaces/interface

Modify VRRP interface configurations, including the TTL value and recovery delay.

  • Request example
    <?xml version="1.0" encoding="UTF-8"?> 
    <interface> 
        <ifName>10GE1/0/1</ifName> 
        <sendModeAll>false</sendModeAll>
        <recoverDelay>2</recoverDelay> 
    </interface>

    Table 3-658describes elements in requests.

    Table 3-658  Elements

    Element

    Description

    ifName

    Specifies an interface name.

    ttlCheckFlag

    Specifies whether a device is enabled to check the TTL value in received VRRP packets. If the TTL value is not 255, the packets are discarded. By default, a device is enabled to check the TTL value in received VRRP packets.

    sendModeAll

    Specifies that VRRP packets are sent to all sub-VLANs of a super VLAN.

    recoverDelay

    Specifies the recovery delay, in seconds. After a recovery delay is configured, a VRRP backup group responds to an interface Up event after the configured recovery delay. The default recovery delay is 0s. Configuring a recovery delay helps suppress interface status flapping.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?> 
    <ok/>

    Table 3-659describes status codes in responses.

    Table 3-659  Status codes

    Status Code

    Description

    200 OK

    The operation succeeded.

    400 Bad Request

    The request operation failed because the request is incorrect in syntax or the information attribute in the request is incorrect.

    500 Internal Server Error

    The request operation failed because of internal errors in services or unidentified processing errors.

Query VRRP Interface Packet Statistics

Operation

URI

Description

GET

/vrrp/interfaces/interface

Query VRRP interface packet statistics, including the number of packets with an incorrect IP protocol number and the number of packets with an incorrect destination IP address.

  • Request example
    <?xml version="1.0" encoding="UTF-8"?> 
    <interface> 
        <ifName>10GE1/0/1</ifName> 
        <vrrpIfStatistics> 
            <ipProtocolErrors></ipProtocolErrors> 
            <destinationIpErrors></destinationIpErrors> 
            <checksumErrors></checksumErrors> 
            <versionErrors></versionErrors> 
            <vrrpIdErrors></vrrpIdErrors> 
        </vrrpIfStatistics> 
    </interface>

    Table 3-660describes elements in requests.

    Table 3-660  Elements

    Element

    Description

    ifName

    Specifies an interface name.

    ipProtocolErrors

    Specifies the number of packets with an incorrect IP protocol number.

    destinationIpErrors

    Specifies the number of packets with an incorrect destination IP address.

    checksumErrors

    Specifies the number of packets with an invalid checksum.

    versionErrors

    Specifies the number of packets with an unknown or unsupported version number.

    vrrpIdErrors

    Specifies the number of packets with an invalid VRRP backup group ID.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?> 
    <interface> 
        <ifName>10GE1/0/1</ifName> 
        <vrrpIfStatistics> 
            <ipProtocolErrors>0</ipProtocolErrors> 
            <destinationIpErrors>0</destinationIpErrors> 
            <checksumErrors>0</checksumErrors> 
            <versionErrors>0</versionErrors> 
            <vrrpIdErrors>0</vrrpIdErrors> 
        </vrrpIfStatistics> 
    </interface>

    Table 3-661describes elements in responses.

    Table 3-661  Elements

    Element

    Description

    ifName

    Specifies an interface name.

    ipProtocolErrors

    Specifies the number of packets with an incorrect IP protocol number.

    destinationIpErrors

    Specifies the number of packets with an incorrect destination IP address.

    checksumErrors

    Specifies the number of packets with an invalid checksum.

    versionErrors

    Specifies the number of packets with an unknown or unsupported version number.

    vrrpIdErrors

    Specifies the number of packets with an invalid VRRP backup group ID.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166567

Views: 27894

Downloads: 123

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next