No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Unicast Routing

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic RIPng Function Configuration

Verifying the Basic RIPng Function Configuration


  • Run the display ripng [ process-id | vpn-instance vpn-instance-name ] command to check the configuration of the RIPng process.
  • Run the display ripng process-id route [ destination-address destination-address [ mask-length ] ] [ interface interface-type interface-number ] [ neighbor-address neighbor-address ] command to check all the RIPng routes that are learned from other switches.
  • Run the display default-parameter ripng command to check the default RIPng configuration.
  • Run the display ripng process-id statistics interface { all | interface-type interface-number [ neighbor neighbor-ipv6-address | verbose ] } command to check statistics about RIPng interfaces.
Updated: 2019-03-21

Document ID: EDOC1000166601

Views: 275528

Downloads: 161

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next