No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Configuration Guide - IP Unicast Routing
CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the OSPF Network Security Optimization Configuration

Verifying the OSPF Network Security Optimization Configuration

Prerequisites

All configuration of improving the security of an OSPF network is complete.

Procedure

  • Run the display ospf [ process-id ] brief command to check the packet authentication information.
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166601

Views: 294858

Downloads: 168

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next