No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Unicast Routing

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Static Routes

Overview of Static Routes

Static routes are applicable to simple networks. Proper static routes can improve network performance and ensure bandwidth for important applications.


A static route is a route that, in most cases, manually configured by the network administrator to allow network traffic to reach a target destination.


Static routes are used in different ways on different types of networks.

  • On simple networks, static routes can be used alone without the need for dynamic routes to ensure network connectivity.

  • On complex networks, static routes can be used alongside dynamic routes to improve network performance and ensure that bandwidth is available for important applications.

  • Static routes associated with VPN instances are used to manage VPN routes.

Updated: 2019-03-21

Document ID: EDOC1000166601

Views: 273990

Downloads: 161

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next