No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Configuration Guide - IP Unicast Routing
CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the BFD for OSPF Configuration

Verifying the BFD for OSPF Configuration

Prerequisites

All configuration of BFD for OSPF is complete.

Procedure

  • Run either of the following commands to check the BFD session information:

    • display ospf [process-id ] bfd session interface-type interface-number [ router-id ]
    • display ospf [process-id ] bfd session { router-id | all }

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166601

Views: 294873

Downloads: 168

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next