No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the RIP Route Receiving Control Configuration

Verifying the RIP Route Receiving Control Configuration

Procedure

  • Run the display rip [ process-id | vpn-instance vpn-instance-name ] command to check the running status and configuration of RIP.
  • Run the display rip process-id database [ verbose ] command to check all activated RIP routes in the database.
  • Run the display rip process-id interface [ interface-type interface-number ] [ verbose ] command to check information about the RIP interface.
  • Run the display rip process-id neighbor [ neighbor-address neighbor-address ] [ verbose ] command to check information about RIP neighbors.
  • Run the display rip process-id route command to check all the RIP routes that are learned from other switchs.
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166601

Views: 275214

Downloads: 161

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next