No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - QoS
CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Redirection

Overview of Redirection

Modular QoS Command-Line Interface (MQC) can be used to implement redirection.

Redirection is the process of redirecting packets that match traffic classification rules to a different destination.

The device supports the following redirection functions:
  • Redirection to the CPU: redirects packets to the CPU.
  • Redirection to an interface: redirects packets to a specified interface by which packets need to be processed or through which packets are sent to a specified device. This action takes effect for only packets forwarded at Layer 2.
  • Redirection to an observing interface group: redirects packets to an observing interface group that contains interfaces of a group of servers or firewalls when packets need to be analyzed and detected by the servers or firewalls.
  • Redirection to a label switched path (LSP): redirects packets to a public LSP so that packets are forwarded on the MPLS network.
  • Redirection to a next hop address: redirects packets to a next hop address when the received packets need to be processed by a downstream device. For details about PBR, see "PBR Configuration" in CloudEngine 12800 and 12800E Series Switches Configuration Guide - IP Routing.

Updated: 2019-03-21

Document ID: EDOC1000166605

Views: 66496

Downloads: 84

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next