No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - QoS
CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing MQC Statistics

Clearing MQC Statistics


MQC statistics are also traffic policy statistics. Before recollecting traffic policy statistics, clear existing packet statistics.

Traffic policy statistics cannot be restored after being cleared. Exercise caution when you use this command.


  • Run the reset traffic-policy statistics { global [ slot slot-id ] | interface interface-type interface-number | vlan vlan-id | vsi vsi-name | vpn-instance vpn-instance-name | qos group group-id | bridge-domain bd-id } [ policy-name ] [ inbound | outbound ] [ classifier-base classifier-name ] command to clear statistics of a traffic policy that has been applied.
Updated: 2019-03-21

Document ID: EDOC1000166605

Views: 66239

Downloads: 84

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next