No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - QoS
CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Congestion Avoidance and Congestion Management

Application Scenarios for Congestion Avoidance and Congestion Management

Congestion Management

Congestion management is often deployed in QoS applications to schedule different services based on priorities

On an enterprise network, when multiple services compete for the same resources (such as the bandwidth and buffer), traffic congestion may occur and high-priority services may be not processed in a timely manner. Packets can be sent to different queues according to the priority mapping result, as shown in Figure 6-9. Different scheduling modes are set in the outbound direction to implement differentiated services.

Figure 6-9 Networking of congestion management

Congestion Avoidance

When congestion occurs or aggravates, congestion avoidance discards low-priority packets to relieve network overload and ensure forwarding of high-priority packets.

As shown in Figure 6-10, users in different LANs may obtain data from the same server, so data exchanged between users and the server passes the WAN. Because WAN bandwidth is lower than LAN bandwidth, congestion may occur on the edge device between the WAN and LANs. Congestion avoidance can be configured on the edge device to discard low-priority packets such as data packets, reducing network overload and ensuring forwarding of high-priority services.

Figure 6-10 Networking of congestion avoidance

Updated: 2019-03-21

Document ID: EDOC1000166605

Views: 66242

Downloads: 84

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next