No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - QoS
CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying MQC Statistics

Displaying MQC Statistics


MQC statistics are also traffic policy statistics. To check forwarded and discarded packets, you can view traffic policy statistics.

To view traffic policy statistics, ensure that MQC and the statistics enable command have been configured.


  • Run the display traffic-policy statistics { global [ slot slot-id ] | interface interface-type interface-number | vlan vlan-id | vsi vsi-name | vpn-instance vpn-instance-name | qos group group-id | bridge-domain bd-id } [ policy-name ] [ inbound | outbound ] [ { classifier-base | rule-base } [ class classifier-name ] ] command to check packet statistics after a traffic policy is applied.


    The CE12800E does not support the vsi vsi-name parameter.

Updated: 2019-03-21

Document ID: EDOC1000166605

Views: 66559

Downloads: 84

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next