No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Detecting Minor Link Events

Detecting Minor Link Events

Context

If an EFM entity receives a link event, it sends an Event Notification OAMPDU to notify the remote EFM entity of the event.

Select one or more detection methods to monitor links based on as needed.

EFM can be configured on Layer 2 and Layer 3 Ethernet interfaces. By default, an Ethernet interface works in Layer 2 mode. Before configuring EFM on a Layer 3 Ethernet interface, switch the Ethernet interface to Layer 3 mode.

Procedure

  • Detecting errored code events

    1. Run system-view

      The system view is displayed.

    2. Run efm enable

      EFM is enabled globally.

    3. Run interface interface-type interface-number

      The view of the interface at one end of the link is displayed.

    4. Run efm error-code period period

      The period for detecting EFM errored codes is set.

      By default, the period for detecting errored codes on an interface is 1 second.

    5. Run efm error-code threshold threshold

      The threshold for detecting EFM errored codes is set.

      By default, the threshold for detecting errored codes on an interface is 1.

    6. Run efm enable

      EFM is enabled on the interface.

    7. Run efm error-code notification enable

      The interface is enabled to detect EFM errored codes.

      By default, an interface is not enabled to detect EFM errored codes.

    8. Run commit

      The configuration is committed.

  • Detecting errored frame events

    1. Run system-view

      The system view is displayed.

    2. Run efm enable

      EFM is enabled globally.

    3. Run interface interface-type interface-number

      The view of the interface at one end of the link is displayed.

    4. Run efm error-frame period period

      The period for detecting EFM errored frames is set.

      By default, the period for detecting errored frames on an interface is 1 second.

    5. Run efm error-frame threshold threshold

      The threshold for detecting EFM errored frames is set.

      By default, the threshold for detecting errored frames on an interface is 1.

    6. Run efm enable

      EFM is enabled on the interface.

    7. Run efm error-frame notification enable

      The interface is enabled to detect EFM errored frames.

      By default, an interface is not enabled to detect EFM errored frames.

    8. Run commit

      The configuration is committed.

  • Detecting errored frame seconds

    1. Run system-view

      The system view is displayed.

    2. Run efm enable

      EFM is enabled globally.

    3. Run interface interface-type interface-number

      The view of the interface at one end of the link is displayed.

    4. Run efm error-frame-second period period

      The period for detecting EFM errored frame seconds is set.

      By default, the period for detecting errored frame seconds on an interface is 60 seconds.

    5. Run efm error-frame-second threshold threshold

      The threshold for detecting EFM errored frame seconds is set.

      By default, the threshold for detecting errored frame seconds on an interface is 1.

    6. Run efm enable

      EFM is enabled on the interface.

    7. Run efm error-frame-second notification enable

      The interface is enabled to detect errored frame seconds.

      By default, an interface is not enabled to detect errored frame seconds.

    8. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166606

Views: 90326

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next