No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Locking Data Flows to a Specified Interface

Locking Data Flows to a Specified Interface

Context

When you need to inspect the primary link in a Smart Link group, forcibly lock data flows to the backup link to prevent impact on services. After the inspection is complete, switch data flows back to the primary link.

If data flows are locked to an interface, they cannot be switched to the other interface automatically if this interface fails, causing traffic interruption.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run smart-link group group-id

    The Smart Link group view is displayed.

  3. Run one of the following commands as required.

    • Run the smart-link lock command to lock data flows to the master interface.
    • Run the smart-link force command to lock data flows to the slave interface.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166606

Views: 125943

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next