No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Virtual MAC Address Mode of VRRP6

(Optional) Configuring the Virtual MAC Address Mode of VRRP6

Context

If the VRRP6-enabled device that is not equipped with the CE-L48XS-EA, CE-L24XS-EA, CE-L48XS-SA, CE-L24LQ-EA, CE-L48GS-EA, CE-L48GT-EA, CE-L48GS-EC, or CE-L48GT-EC card needs to connect to other devices, run the vrrp6 virtual-mac mode standard command to configure the virtual MAC address mode of VRRP6. Then the device sends VRRP6 Advertisement packets with the standard virtual MAC address.

In standard mode, the virtual MAC address in outgoing VRRP6 Advertisement packets is 00-00-5E-00-02-{VRID}.

In non-standard mode, the virtual MAC address in outgoing VRRP6 Advertisement packets is 00-00-5E-00-01-{VRID}.

NOTE:

The CE12800E does not support this function.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vrrp6 virtual-mac mode standard

    The device is configured to use the standard virtual MAC address mode of VRRP6.

    By default, the non-standard mode is used.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166606

Views: 125939

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next