No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Device to Calculate a VRRP6 Advertisement Packet's Checksum Based on the Content Excluding the IPv6 Pseudo Header

(Optional) Configuring a Device to Calculate a VRRP6 Advertisement Packet's Checksum Based on the Content Excluding the IPv6 Pseudo Header

Context

After a Huawei device receives a VRRP6 Advertisement packet, it calculates the packet's checksum based on the content including the IPv6 pseudo header. However, a non-Huawei device may calculate the packet's checksum based on the content excluding the IPv6 pseudo header. As a result, VRRP6 negotiation between the Huawei and non-Huawei devices may fail. To resolve this issue, run the vrrp6 checksum exclude pseudo-header command to configure the Huawei device to calculate the packet's checksum based on the content excluding the IPv6 pseudo header.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vrrp6 checksum exclude pseudo-header

    The device is configured to calculate a VRRP6 Advertisement packet 's checksum based on the content excluding the IPv6 pseudo header.

    By default, the device calculates a VRRP6 Advertisement packet 's checksum based on the content including the IPv6 pseudo header.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166606

Views: 119458

Downloads: 89

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next