No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining DLDP

Maintaining DLDP

Context

To view DLDP statistics within a specified period, clear existing statistics and then use a display command.

The DLDP statistics cannot be restored after being cleared; therefore, confirm the action before you perform the operation.

Procedure

  • Run the reset dldp statistics [ interface interface-type interface-number ] command in the user interface to clear DLDP packet statistics.
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166606

Views: 92340

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next