No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Virtualization

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Basic Concepts of Stack

Basic Concepts of Stack

Figure 1-4 shows the roles and concepts in a stack.
Figure 1-4 Roles and concepts in a stack
  • Roles

    Switches that have joined a stack are member switches. Each member switch plays one of the following roles:
    • Master switch

      The master switch manages the entire stack. A stack has only one master switch.

    • Standby switch

      The standby switch is a backup of the master switch. If the master switch fails, the standby switch takes over all services from the master switch. A stack has only one standby switch.

  • Stack domain

    After switches are connected using stack links and set up a stack, they form a stack domain. Multiple stacks can be deployed on a network to support various applications. These stacks are identified by their domain IDs.

  • Stack member ID

    Stack member IDs are used to identify and manage member switches in a stack. Each member switch in a stack has a unique member ID.

  • Stack priority

    The stack priority of a member switch determines the role of the member switch in role election. A larger value indicates a higher priority and higher probability that the member switch is elected as the master switch.

  • Stack member port

    After the mode of a physical port is set to stack, the port becomes a stack member port. Stack member ports are used to connect stack member switches.

  • Stack port

    A stack port is a logical port exclusively used for stacking and includes several stack member ports. Multiple stack member ports can be added to a stack port to improve stack link bandwidth and reliability.

    Each switch supports one stack port. Before the stacking function is enabled, the stack port is named Stack-Port1. After the stacking function is enabled, the stack port is named Stack-Portn/1, where n is the stack member ID of the switch.

Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 43988

Downloads: 131

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next