No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Configuration Guide - Virtualization
CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing a Stack

Establishing a Stack

Figure 1-32 shows the procedure for establishing a stack. Before establishing a stack, make a proper network plan, confirm software and hardware requirements, and determine roles and functions of member switches. Then connect member switches using cables and complete software configuration.
Figure 1-32 Procedure for establishing a stack
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 46702

Downloads: 136

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next