No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Virtualization

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Stack Priority

Configuring a Stack Priority


The stack priority of a member switch determines its role in the stack. A larger value indicates a higher priority and higher probability that the member switch is elected as the master switch.


  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. Run the stack priority priority-value command to configure a stack priority for the switch.

    By default, the stack priority of a switch is 100. After changing the stack priority, restart the switch for the configuration to take effect.

    When a switch already has the stacking function enabled, run the stack member { member-id | all } priority priority-value command to change the stack priority of the switch.

  4. Run the commit command to commit the configuration.
Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 44274

Downloads: 131

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next